I think it's been about two weeks since the motherboard released, however I haven't seen Micro Centers have it in stock, specifically the Brooklyn location. Is there any way the board will come in stock anytime soon?
I brought my pc to micro center and as soon as they plugged it in it turned on and ran phenomenal. We tried different chords, so the issue must have been the outlet. However, I come home and try every outlet in the house but the problem persists of only the case lights turning on. Do I need to call an electrician? If…
Greetings everyone! This is my very first post here and I'm looking forward to some great and comprehensive help from fellow PC users. I'm getting a blue screen with the error message "inaccessible boot device" after I install a (non-M and H) 16GB Optane module to accelerate my secondary HDD, a Seagate Barracuda 2TB, which…
I just booted up a new computer from Micro Center St Louis and it keeps disconnecting and being very slow when it rarely does connect. It has a 2080S and both a wifi 4 and 5. I have windows 10 on it, and a dell monitor. Edit: wifi working now, usually 2 sometimes 3/4 bars, but it's still no audio Edit: wifi not working,…
When I was in a couple days ago there was a returned marked down PC-O11 Dynamic RGB Razer Edition Tempered Glass ATX Mid-Tower Computer Case - Black. Trying to just see if it's still there before I make the drive. Thanks.
So I’m really hoping someone can help me. My friend walked me through building a PC and everything seemed fine until the end when I plugged it in. The lights in my Meshify C case turned on but the fans did not. I checked the ASRock B450 motherboard layout and made sure everything was plugged into the correct place. I’ve…
This discussion was created from comments split from: About making a purchase in person.
Hello all, After booting, I get a error that says "Load VGA BIOS." My motherboard is the ASUS ROG Crosshair VIII Formula and my GPU is the ASUS ROG 2070 Super Advanced. I am currently on the latest motherboard BIOS (2010). I have tried the following: * Resetting the CMOS * Updating the BIOS (to 2010) * Reseating the GPU *…
Trying to purchase a laptop and originally saw protection plan option. Returned to the item and don't see where that protection can be selected.
Good day, Is it possible to upgrade outdated ports i.e USB 3.0 to USB-C or USB 3.1 or USB 3.2? I'm currently using: DELL INSPIRON 7567 i7-7700HQ 15.6″FULL HD 16GB 256GB SSD + 1TB GTX 1050Ti 4GB
New Lenovo I sign on with fingerprint now asking for my pin. I did not write it down apparently. How do I unlock? Thank you
Hey everyone, So I bought an Acer VG240Y back in February of 2020. I later decided to run a dual monitor setup and picked up a second of the exact same monitor today now that they are back in stock. Long story short, the monitors are the same, the SKU's are the same, but one monitor is running at a 10-bit color depth while…
We want to buy a dell inspiron computer. We want to talk to someone about how we would transfer files from an old computer to the new one. How is this done? Do we bring in the old computer or do you do this remotely? My email is [removed for privacy].
Roughly a week ago I picked up a PowerSpec G465 and out of the box I'm noticing that the RTX 2080 Super that it came with is reaching up to 87C while under full load. I tried contacting Micro Center's live chat support about it and whomever I spoke to said that the average temp under load for one of these cards should be…
I recently purchased the parts to build a new system for my parents. System is comprised of a ASRock B450 PRO4 that is Ryzen 3000 ready(BIOS 3.9), Ryzen 5 3600X Matisse CPU, Corsair Vengeance 16GB DDR4-3200 Ram, WD Black 500GB SSD 3D V-NAND. Since they will not be doing any gaming, I am just using the onboard video card. I…
computer will not connect to wifi
Hello, I bought the Sapphire 5700XT nitro+ . I would like to know how its warranty is ? Like how long is it and it will be process through microcenter or sapphire since I read on Sapphire website that they state any warranties will go with seller (place of purchase). Thank you.
Hi everyone, last night one of my cooling fans started acting weird, it basically starts spinning and then suddenly slows down with rattling noises and comes to a full stop and then it repeats the cycle, computer is booting normally and the rest of the hardware works fine including 2 other cooling fans. Any ideas what…
with PowerSpec screen. If I disconnect my external drive and use the power switch at back, I can get it to boot then reconnect my drive. I have read that disabling Fast Bootup in Windows 10 is a fix for that..haven't been able to get time for a reboot yet. Anyone have experience with this?
Hello, We bought a store-built computer PowerSpec GEForce RTX2060 a little over a month ago, and now the wireless connection stop working. We unplug and re-plug the adapter and it still doesn't work. Wired connection works fine. Please help. Thank you, AlexP
Hello, I can't use my microphone because it picks up a buzzing coming from the computer. It's very annoying even without affecting the use of a microphone. Anyway to fix this? Is it the fans hitting against a wire or something? Thank you
Any word on when Microcenter will get stock of MSI X570 Tomahawk motherboard? Also any chance of it being available as combo dal with 3900X?
Hi all, my powerspec ultra is printing everything about 10% smaller than put in. I have tried to slice my builds using their recommended software 'powerprint' and the flashforge software 'flashprint' I have also done a firmware update. I know its not natural PLA shrinkage. I am out of ideas. Help!
I am building 2 identical computers for my kids. I have most of the components purchased except the motherboards. I found that my local Microcenter had a bunch of the new low-end b550 mATX boards in stock, but the local store won’t sell me 2. I asked for an exception to the 1 per household restriction on them, and was told…
New PC nothing installed except Microsoft edge. I need to download Google Chrome and it doesn't seem to download. I am not used to Microsoft edge. Would have been nice if salesperson showed me what to do.
Hi,I dropped off a pc at the Tustin location and I’d like to know when it’s done,it’s been 3 days
So I'm trying to assemble this maingear Forma GT chair, and the Hydraulic Lift Cylinder seems a bit strange. It doesn't look like the diagram, the directions say to remove the red protective cap. There was none and when I drop the Cylinder in it goes down really far.
Hi, I would like to know my laptop repair is done this morning and ready to pick up. Please advise.
I'm thinking about purchasing a Tartarus Pro but after reviewing Razer's website, I have a question. Is Micro Center a Razer Authorized Dealer or Reseller? They only offer a warranty to items purchased from authorized resellers and Micro Center doesn't appear on their list. I'd like to buy this from my local store but if…
If i supply all the parts on my own (i would drop them off) is there someone at the westbury location in new york that can build the pc? If yes, what is the builder fee?
Submit photos and a description of your PC to our build showcase
See other custom PC builds and get some ideas for what can be done
Services starting at $149.99
